Product ID:JXA226 INTERTUF EPOXY BLACK BASE (HF)
MSDS Date:08/17/1992
FSC:8030
NIIN:01-124-9761
Kit Part:Y
MSDS Number: BPFJQ

INTERNATIONAL PAINT CO INC

6001 ANTOINE
HOUSTON, TX 77292
US

Emergency Phone: 713-682-1711

Info Phone: 713-682-1711

Cage: 69827

INTERNATIONAL PAINT INC. INTERNATIONAL

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 69827

COAL TAR PITCH VOLATILES (BENZENE SOLUBLE FRACTION),

CAS: 65996-93-2

RTECS: GF8655000

Fraction By Weight: 42.576%

OSHA PEL 0.2 MG/M3

ACGIH TLV: 0.2 MG/M3, A1; 9192

N-BUTYL ALCOHOL (SARA III)

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 1-5%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

AROMATIC HYDROCARBON

CAS: 64742-95-6

Fraction By Weight: 5-10%

PROPYLENE GLYCOL METHYL ETHER ACETATE

CAS: 108-65-6

RTECS: AI8295000

Fraction By Weight: 5-10%

METHYL ISOAMYL KETONE

CAS: 110-12-3

RTECS: MP3850000

Fraction By Weight: 1-5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

FUMED SILICA

CAS: 112945-52-5

Fraction By Weight: 1-5%

POLYAMIDE RESIN

CAS: 68410-23-1

Fraction By Weight: 1-5%

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 1-5%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:SUPPLIER DID NOT ADDRESS THIS FIELD.
Explanation of Carcinogenicity:IARC AND NTP CLASS COAL TAR PITCH AS A
CARCINOGEN. SEE INDIVIDUAL REPORT FOR DETAILS.
Effects of Overexposure:EYE:SEVERE IRRITATION, REDNESS, TEARING,
BLURRED VISION. SKIN:IRRITATION, MAY RESULT IN DERMATITIS. HARMFUL
IF ABSORBED THROUGH SKIN. INHALED:IRRITATION OF RESPIRATORY TRACT,
HEADACHE, DIZZINESS, UN CONSCIOUSNESS. INGESTED:G/I
IRRITATION,NAUSEA, VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATOUY CONDITIONS.

First Aid:EYES:FLUSH IMMEDIATELY WITH COPIOUS AMOUNTS OF WATER FOR 15
MINUTES. GET MEDICAL ATTENTION. SKIN:REMOVE CONTAMINATED
CLOTHING,WASH SKIN WITH PLENTY OF SOAP & WATER. LAUNDER CLOTHS
BEFORE REUSE. INHAL ED:REMOVE TO FRESH AIR. GIVE
ARTIFICIALRESPIRATION. GET MEDICAL ATTENTION. INGESTED:GET
MEDICAL ATTENTION IMMEDIATELY. DRINK PROMPTLY MILK, EGG WHITES,
GELATIN SOLUTION OR WATER AVOID ALCOHOL.

Flash Point Method:SCC
Flash Point:100F,38C
Lower Limits:1.4
Extinguishing Media:FOSM, CO2, DRY CHEMICAL * DO NOT USE WATER TO
EXTINGUISH FIRE!
Fire Fighting Procedures:SMOTHER FLAMES W/ ONE OF THE ABOVE
EXTINGUISHING MEDIC. USE WATER TO COOL CONTAINERS. DO NOT SPREAD
BURNING LIQUID W/ WATER. CLOSED CONTAINERS MAY EXPLODE.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREA WITH SPARKS OR FLAME. MAY EXPLODE IF CONTAMINATED W/ STRONG
OXIDIZING AGENTS. CONTAINERS MAY EXPLODE W/ XS HEAT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT
MATERIALS.,
Neutralizing Agent:NO INFORMATION GIVEN ON MSDS BY SUPPLIER

Handling and Storage Precautions:MFR REFERS TO NFPA CLASS OR OSHA CLASS
LISTED IN FIRE HAZ SECT. THERE WAS NONE LISTED.
Other Precautions:AVOID BREATHING DUST OR CHIPS FROM SANDING OR
BLASTING SURFACES COATED WITH THIS PRODUCT. CHRONIC OVEREXPOSURE
TO, OR MISUSE OF, SOLVENTS HAS BEEN LINKED TO PERMINENT BRAIN AND
NERVOUS SYSTEM DAMAGE.

Respiratory Protection:IN OUTDOOR OR AREAS WITH UNRESTRICTED
VENTILATION, USE NIOSH APPROVED FILTER RESPIRATOR TO REMOVE
PARTICULATES OF OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED
AREAS USE NIOSH APPROVED RESPIRATOR TO REMOVE PARTICULATES AND
ORGANIC VAPOR
Ventilation:SEE SUPP DATA.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GLASSES, GOGGLES OR FACE SHIELD
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
PROVICE SUFFICIENT VENTILATION TO KEEP TLV AND LEL OF HAZARDOUS
INGREDIENTS BELOW THE LIMITS SPECIFIED BY THE MANUFACTURER AND TO
REMOVE DECOMPOSITION PRODUCTS DURING CUTTING OR WELDING ON SURFACES
CO ATED WITH THIS PRODUCT.

HCC:F4
Boiling Pt:B.P. Text:244F,118C
Vapor Density:>1
pH:UNKNON
Evaporation Rate & Reference:<1 ETHER = 1
Percent Volatiles by Volume:UNKNON

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME,
SPARKS.
Hazardous Decomposition Products:CO, CO2, HYDROCARBON FRAGMENTS,
ALDEHYDES, NITROGEN COMPOUNDS, TAR AND/OR PITCH FUMES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE I/A/W ALL FEDERAL, STATE AND LOCAL
REGULATIONS. DO NOT INCINERAAATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.